• Charge your Tesla anywhere in Europe with a UMC

    Maximise charging speed and flexibility with our hand-made, fully tested and certified charging cables for your Universal Mobile Connector (UMC).

Xavelec will not be making new cables over the Christmas period. Items in stock will be delivered, but back-orders won’t be fulfilled until January 2023.

Note for new Tesla Model S, 3, X and Y owners

Since 2019, Tesla has been providing a new type of Universal Mobile Connector (UMC) or portable EVSE with new Model S, 3, X and Y deliveries.

As a result, there are now two different types of UMC. A Gen1 UMC that used to be provided with all Model S and X vehicles, and a newer Gen2 UMC provided with S, 3, X and Model Y cars.

Xavelec now caters for both kinds of UMCs and can provide adaptors for both models.

If you have a Gen1 Model S or Model X UMC, you can use this with all four versions of the car. If you have a three-phase supply, all Tesla cars will charge on three phase at up to 11kW. The newer Gen2 UMC is limited to single-phase which can end up being the bottleneck should a three-phase supply be available, although 32A single-phase is possible via an optional Gen2 UMC adaptor which can be purchased directly from Tesla.

An efficient, modular, expandable charging system

The one-stop solution to providing ultimate connection flexibility when it comes to using your Tesla EV UMC to recharge your Model S, 3 or X whilst on the move.

Based on three simple components, our charging system allows you to buy and take just what you need on your travels, reducing clutter and unused cables and adaptors. You’ll only ever need one extension lead, regardless of power source. Both single-phase and three-phase compatible, you no longer need to take a plethora of charging leads.

Our system is available in “Standard” format using the industry-standard CEE Commando connectors an also a compact plug-in system providing smaller, easier to use and fully waterproof connectors!

The three main components of our charging system

Our system comprises of three components:

  • A plug adaptor which corresponds to the available power socket
  • A single universal extension lead that can be used with all of our plug adaptors
  • The Tesla 16A 3-phase red industrial power adaptor for Gen1 UMCs and the Tesla 16A single-phase blue industrial power adaptor for Gen 2 UMCs
1
2
3
1

Power socket adaptor

A set of different adaptors are available to match the power source socket

2

Extension lead

16-amp three-phase extension lead compatible with all our adaptors.

3

Tesla UMC with red three-phase adaptor

Using the Tesla UMC’s red adaptor enables the use of our charging cable system.

Designed to withstand the tough outside

H07RN-F cable

All our adaptors and leads use the highest quality Nexans Titanex H07RN-F rubber cable, designed for its ruggedness and resistance to abrasion and liquids including oils and of course water. It remains extremely flexible, even in sub-zero arctic temperatures. The specification of this cable is not to be confused with cheaper PVC-coated extension leads which are far less resistant to the elements and deteriorate far more rapidly through general wear and tear.

We have two ranges of connectors; industry-standard IEC 60309 connectors which are IP44 rated like the Tesla UMC, and a compact, fully waterproof IP68 range of connectors. The former ones are splash resistant and are fine to be left in the rain. The compact range give extra peace of mind and has no problems left submerged in water, but please remember that the UMC is not fully waterproof so steps must be taken to keep it out of deep standing water.

Fast charging – up to 11kW

All our extension leads support 16A 3-phase charging which allows the Gen1 and Gen3 UMCs to operate at their maximum potential, providing 3-phase power is available.

Where 3-phase isn’t available, or when a Gen2 UMC is used, 4kW is available via 16A single-phase charging.

The video to the right shows three-phase charging at 16A per phase. The total power peaks at 12kW, this is due to the relatively high voltage of around 240V AC. You can see that this tends to drop a bit once charging starts. A lower quality / smaller cross-section cable would provide a bigger voltage drop which in turn would slow down the effective charging power and charging speed. As a result, the car would interpret this voltage drop as increased resistance and to prevent excessive heat build-up due to a sub-par cable, the car will automatically reduce the charge current from its nominal value. If this happens, you will have a notice message appear on the dash.

Note: if using one of our domestic adaptors such as the UK 13A plug adaptor or the European Schuko adaptor, you will have to reduce the charge current from 16A to a safe level. Most of the time, this will be around 10 amps. If you do not reduce the charge current, the circuit breaker providing power to the socket the UMC is plugged into is likely to trip, or in the case of the UK 13A plug adaptor, the fuse in the plug will blow. Charge current settings are geo-located so the car will remember the setting next time you plug in and charge at the same place. You should only have to do this the first time you charge at a new location, but it’s good practice to check. Recent firmware allows you to manually reduce the charging current before charging starts which is a good thing!

Safety tested and certified for peace of mind

All of our extension leads and adaptors are fully tested and PAT certified. This not only gives you peace of mind, but also can also provide reassurance to any staff who insist any electrical equipment plugged into their facilities has to be fully PAT approved.

Our testing is performed with our calibrated Kewtech PAT equipment which ensures there are no current leakages and every conductor cable presents sufficiently high insulation resistance beyond the high charging currents used in normal operation.

Each cable and adaptor will have a unique Appliance ID number and the individual test result for each appliance will be provided both as a PDF for your records and a laminated, rain-resistant A4 printout you can keep in the car to show to any official or staff member prior to plugging in if required.

PAT label

Charge anywhere in Europe with our adaptors

.

Our wide range of adaptors enable you to charge just about anywhere in the UK and across continental Europe. Furthermore, all of our adaptors are available in both Standard and Compact versions.

  • Charge in the UK with our UK 13A plug adaptor.
  • Charge in continental Europe with our Schuko adaptor.
  • Charge in France, regardless of polarity wiring with our phase inversion adaptor.
  • Charge at caravan, camping sites and marinas where 16A single-phase blue sockets are common.
  • Charge from more specialised sockets such as the French three-phase “Plexo”, 16A and 10A Swiss three-phase, etc.
  • When only an indoor socket is available, don’t let the letterbox defeat your cable route – our Compact range of adaptors allows easy passage through small spaces.

Always reach the power outlet

Extend the distance between the power source and UMC using our range of extension leads supporting three-phase power.

The three-phase 16A capacity ensures it’s the only extension lead you’ll need to use with the Gen1 UMC and charge at the maximum available speed, regardless of the type of power socket.

The modular approach also allows you to combine a several leads ensuring you’re never defeated by an obstacle or length. For example, if a 16A single-phase blue socket is available in a workshop, but you want to keep the workshop locked and use the letterbox, you can combine the 16A blue socket adaptor with a 5 metre extension lead to reach the letterbox, then insert the letterbox adaptor followed by another short lead to reach the UMC. It’s a simple mix and match approach allowing you to charge virtually anywhere. Or you can just use our Compact connectors which fit through most letterboxes natively.

Note: we recommend you do not exceed a total length of 30 metres to minimise any potential voltage drop.

We also have 32A single-phase extension leads and normal 13A UK extension leads.

© 2023 Xavelec, part of Xav Broadcast Ltd. | All rights reserved. No reproduction of any content permitted without prior written approval
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)